How To Repair A Moen Shower Valve

The about common event with a malfunctioning Moen pressure-counterbalanced shower valve is with the cartridge inside the faucet. The cartridge is meant to firm the valves which manage the water force per unit area of the shower stream. If y'all're experiencing a leak near the handle or a loss of control over the water rut, the cartridge is the likely culprit. With the correct parts, this consequence can be solved in under half an hour.

In order to gear up the pressure-balance, yous will need to safely remove the faucet, take autonomously the internal mechanism, supplant the cartridge, and put it all back together.

What Tools/Materials Are Needed?

• A new shower cartridge
• Silicone grease
• A Phillips screwdriver
• An Allen wrench
• Needle-nose pliers
• A rag

Additionally, yous could purchase a Moen cartridge puller to brand extracting the faulty cartridge easier, only so long every bit y'all have patience, the pliers, and the plastic adapter that comes with the new cartridge, the brand name puller isn't necessary.

Before You Remove the Faucet

Subsequently assembling all the tools and materials, there are a few prophylactic precautions that must be taken.

• Shutoff the h2o supply to the shower being fixed. If in that location is a specific shutoff valve for the faucet or showerhead just use that, otherwise shutoff the supply to the whole house and drain the water even so in the pipes.
• Drain out the h2o. Be sure to use the lowest faucet in your home. Doing this volition prevent whatever mess or hot water accidents while replacing the cartridge.

Taking the Faucet Autonomously

Now you're ready to disassemble the faucet! Here is a pace-by-step guide to help you in doing this at home. If you'd rather let our professionals repair your Moen shower valve for you, schedule an appointment by calling 808-400-9366.

1. Use the rag to stuff the drain. Great care must exist taken to non lose whatsoever piece of the faucet, since everything except the cleaved cartridge will be needed for reassembly.
2. Use the Allen wrench to remove the screw attaching the handle to the faucet, and then pull the handle off to reveal the inner assembly.
3. At that place should exist a slice of black plastic with a screw at its center. This is the adapter for the handle. Using the screwdriver, remove the adapter by unscrewing its eye.
4. Carefully pull it off, and then exist set to pull off a chromium sleeve. There may also exist a slice of white plastic which is an optional temperature limit. If you see it, pull this off likewise.
5. After the chromium sleeve is off, the clip holding the cartridge in its place will be visible.
   1. If you have a Moen cartridge puller, follow it'southward instructions to remove the cartridge.
   2. If y'all don't have the cartridge puller, take the plastic adapter from the new cartridge, fit it onto the stem of the cleaved cartridge, then utilize the pliers to grip the adapter and pull out the broken cartridge.

At present that we've taken everything out, it'southward fourth dimension to fix the issue and put it all back together.

Reassembling the Valve and Faucet

Subsequently you lot remove the malfunctioning piece, expect inside the valve body to see if it's make clean and gratuitous of obstructions. Lubricate the rubber office of the replacement cartridge with the silicone grease and insert information technology into the valve body every bit far as information technology will go. If there is an 'H C' label on the cartridge, adjust so that it's on superlative.

Replace the cartridge retaining clip. Make sure it is fully seated against the valve body, merely do non strength it back on. Supersede the chromium sleeve, plastic parts, and handle as you plant them, then secure them with the set screw.

Turn the water supply back on and test your work.

If you accept a plumbing upshot and just want to experience comfy in your home, contact Emergency Plumbing & Solar at 808-691-9309 for affordable, around the clock service anywhere on Oahu.

Source: https://www.epshawaii.com/blog/repairing-a-moen-pressure-balanced-shower-valve/

Posted by: eiseleessurn.blogspot.com

Share this post